Library Tote Bag Tutorial

I recently got to spend time with my friend and her darling children!!  I made them each a library tote bag using this tutorial and these new fabrics from Riley Blake Designs!  I love that there is a Lancelot and a Guinevere fabric line!  You can’t go wrong!  This tote bag is the perfect size for library books, music books, ballet clothes, a car ride to grandmas, or a trip to the pool!  It’s so versatile!!!

These fun little bags take about an hour to sew (that is if you are focused and not watching Netflix!). They make cute little birthday gifts!

OK let’s get started!!
(In the photos I switch back and forth between the Guinevere and the Lancelot, just focus on the measurements and the process)

Fabric Requirements

1/3 yard outer bag main fabric

5 prints for accent piecing – 10 squares 3 1/2″ each

1/8 yard top band fabric

1/4 yard handle fabric

1/2 yard lining fabric

2/3 yard fusible medium weight stabilizer

Cutting Instructions

Follow the above instructions for cutting the outer bag pieces.

Cut (1) 5″ x width of fabric strip for handles

Cut (2) 15 1/2″ x 15 1/2″ squares of lining fabric

Cut (2) 15 1/2″ x 15 1/2″ squares of staibilizer

Begin by sewing (5) 3 1/2″ squares together in a horizontal row.  Press seams in one direction. Make two of these units.

Sew the 2 1/2″ x 15 1/2″ rectangle to the top of the square strip.

Sew the 10 1/2″ x 15 1/2″ bottom piece to the bottom of the square strip.  Press away from the square unit.

Repeat this step so you have two identical units for the front and the back of the bag.

These are the lining fabrics I choose!  So cute!!!

Fuse the stabilizer to the wrong side of the two outer bag pieces.

Add a little top stitching accent along the square strip.

For the handles, press the 5″ strip in half lengthwise.  Open and press the edges in to meet the center crease.  Press.

I fused a 1″ piece of stabilizer inside the handle along the entire length.  This is totally optional.

Fold the handle in half again (now it is folded in 4ths) and press.Top stitch 1/8″ along both sides of the handle.  I like to use my walking foot so nothing shifts.

I love top stitching!  Cut the long handle strip exactly in half so you now have two handles!

Pin the handles to each outer bag piece.  Measure in 4″ from the edge and pin in place.  Notice I overlap the edge of the handles about 1/4″.  This is to ensure that they fully get caught in the seam.  Baste the handles  1/8″ away from the top of the bag.

Pin the outer bag pieces right sides together, leaving the top open.

Pin the lining pieces right sides together leaving the top open.

Sew the sides and bottom of the bag using 1/4″ seam allowance.

*Tip – I use a slightly larger seam allowance on my lining – it makes all the difference in making sure it fits inside the bag!

Cut a 2″ square out of paper and use it as your guide to cut a 2″ notch out of the bottom two corners of the outer bag and the lining.

Open the 2″ square and match the seams together.  Pin.  Sew 1/4″ along this edge, backstitching to start and stop.

Do this to each corner of the outer bag and the lining.

Leave the outer bag inside out and turn the lining right side out.  Put the lining inside the outer bag so right sides are together.  Match the side seams.  Pin all the way around the bag.

Sew using 1/4″ seam allowance all the way around the bag.

Using a seam ripper, unstitch 3″ of the side seam and turn the bag right side out.  Sew the opening closed by topstitching on the machine in matching thread.

Press the lining inside the bag and top stitch 1/8″ all the way around the top of the bag.

So fast and easy!  The children were so excited to get to keep the bags!!  Happy sewing!!